1. Site Prerequisites
-
Power: Ensure a standard 100–240VAC (50–60Hz) power outlet is available near the installation site to support the external 30W universal power adapter brick.
-
Network: Run a dedicated RJ45 copper network cable connected to a local Gigabit network switch (1 Gbps capability). There is no wifi support at the time.
-
Mounting Interface: Verify your mounting apparatus if you need Vesa (wall mount, articulating arm, or proprietary stand) utilizes a standard VESA FDMI-compliant four-hole pattern with M4 screws in a 100x100 mm pattern.
2. Unboxing & Inspection
-
Carefully unpack the kit and verify the presence of the FactoryClient unit, the 30W power adapter brick, regional power cords, and mounting fasteners.
3. Mounting the Terminal
-
Lay the monitor face down on a clean, flat, and protected surface.
-
Align your VESA-compliant mount or stand with the rear holes of the monitor frame and secure it tightly using the provided M4 fasteners.
-
Or mount on Wall or DIN rail
4. Cable Integration
-
Connect your display
-
Connect your keyboard (necessary at least for 1st initialization)
-
Connect the local RJ45 network cable into the monitor's dedicated NIC port.
-
Connect the power brick
5. Initial Power On
-
Locate the physical Power Button and toggle it to boot the unit.
-
Verify that the system status indicator light transitions to a solid green color